9/15/2023 0 Comments Extron mlc![]() ![]() Press the pegs and buttons of the membrane into the faceplate. On the back of the faceplate, set the new button membrane at the desired location, with the two pegs in the upper-left and lower-right corners of the membrane in the faceplate holes at opposite corners of the row (see the illustrations at left and at right). If replacing the faceplate, repeat this step until all the buttons are removed. If desired, replace the buttons in the faceplate as follows:įrom the front of the faceplate, press the button membrane to be replaced backward through its faceplate openings until it comes free. Lift the faceplate off the MLC circuit board. Insert the flat end of a small screwdriver into each side slot (as shown at right) and press inward until the tab is released from its slot. On the right and left edges of the faceplate are two pairs of slots, into which two small tabs on either side of the MLC fit. Remove the faceplate from the MLC module as follows: (Optional) Change the faceplate and buttons as needed. Prepare and pull the cables through the electrical box. Install the electrical box, following the instructions provided with it. ![]() The MLC 62 EU and MK controllers can be installed in a standard EU or MK one-gang electrical wall box: Installation and service must be performed by authorized personnel only.įor full installation, configuration, and operation details, see the MLC 60 Series User Guide, available at ![]() Aleksanyan Subject: Extron MLC 226 Series specifications Keywords: 09/28/18, D16. Both models have six-button and eight-button options. MLC 226 Series MediaLink® Controllers Author: E. A digital input and two relays enable monitoring and controlling of other devices in the room. Both models provide RS-232 serial and IR ports for universal display control. The controllers have backlit soft touch buttons and can control common AV functions, including power, input switching, and volume. The EU model attaches to a single size European electrical junction box with a 60 mm mounting center the MK model mounts to a single size MK junction box. The Extron MLC 62 RS EU and the MLC 62 RS MK are keypad controllers for use in classrooms and meeting facilities. The MLC Plus 50 is an easy-to-use Ethernet controller designed for handling common AV functions, such as display on/off, input switching, volume control. For the MLC 62 RS EU and the MLC 62 RS MK ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |